KLX 110 Graphics
KLX110 Plastics
KLX 110 Chassis
KLX110 Engine
KLX110 Wheels / Brakes
KLX110 Tires / Tubes
KLX 110 Billet
KLX110 Handle Bar
KLX 110 Foot Pegs
KLX110 Exhaust
KLX 110 Intake
KLX110 Carburetors
KLX 110 Oil
KLX110 Suspension
KLX110 Drivetrain
KLX 110 Seats
KLX110 Ignition
KLX 110 Shift Levers
Factory Ride Graphics
Jetting of Carbs
INSTAGRAM
PAYPAL - GUEST CHECK OUT
KLX110 Service Manual

TB Front Wheel Assembly, HD Aluminum Rim, HD Spokes – All KLX110
TB Front Wheel Assembly, HD Aluminum Rim, HD Spokes – All KLX110TB Front Wheel Assembly, HD Aluminum Rim, HD Spokes – All KLX110
TB Front Wheel Assembly, HD Aluminum Rim, HD Spokes – All KLX110
Item#: TBW1576
$259.95
Bike: 

Product Description
TB Front Wheel Assembly, HD Aluminum Rim, HD Spokes – All KLX110

After seeing many aggressive riders tear apart KLX110 wheels racing them on mini MX tracks, we wanted to bring a new high quality and affordable option to the market. So, our wheels come ready to run from bearings to the rim! Starting out, we had the factory install high quality NTN bearings with the proper spacer behind/between them. Next, is our OEM style “bolt in place” cast aluminum hub painted in silver to match the OEM brake panel (our TB logo is also cast in). For added strength, we used stiffer/harder Stainless Steel spokes that are weather resistant compared to the basic steel OEM spokes. Wrapping up the complete wheels, are the aircraft grade 7050 aluminum rims in satin black with the TBparts.com logo! The black rims look great once installed! These are lighter, stronger, and more weather resistant than the factory steel rims. Not to mention, ours come laced saving you a ton of time and hassle! An OEM wheel like this will set you back over $430.00 – The value these offer is unmatched!!

Features:

Factory installed NTN wheel bearings

OEM style “bolt on” hub with TB logo

Stainless steel Spokes

7050 aluminum rim in satin black with TBparts logo

Laced and ready to bolt on!

Huge Value!

Size

Front 14×1.4″

Important Notes –

We recommend re-torquing your axle nut after the first 15 min of ride time. We TQ the front to 15ft-lbs and the rear to 19ft-lbs or you can use the OEM specs of 32ft-lbs for the front and 47ft-lbs for the rear. Its a good idea to check and adjust your chain while doing this.

After 1 hour of ride time the spokes should be checked to make sure they are tight. Keeping your spokes tight is a good way to ensure a long life out of the wheel. True your wheels for best results.

The steel brake drum is painted to avoid rust for storage, it will wear in once used.